Soil Cement Bentonite
Soil Cement Bentonite Slurry Walls are a Stronger Selection of Slurry Walls
Soil Cement Bentonite Features higher Slurry Trench Stability
Soil-Cement-Bentonite (SCB) Slurry walls are a variation on the more common Soil Bentonite slurry wall. In this method, the soils excavated from the trench are generally blended with bentonite and cement to provide additional strength to the final backfill.
Advantages of Soil-Cement-Bentonite Slurry Walls
- Most of the advantages of SB slurry walls apply to SCB walls
- Higher strength than SB or CB walls
- Greater trench stability is possible because the SCB backfill creates a shorter backfill slope.
- More resistant to erosion and burrowing animals - extremely important in levee applications.
- SCB as a material has also been used to provide a protective encasement for critical foundations and as a replacement for compacted clay when construction must take place in wet and cold conditions.
- SCB is closely related to roller compacted concrete and soil cement.
Construction Methods for Soil Cement Bentonite Slurry Walls
SCB walls are excavated using the same general methods as for a Soil Bentonite Slurry wall. SCB backfilling requires some additional equipment for handling the cement and for making cement grout which is added to the backfill. Cement is added to the backfill most often as a grout, but also in dry powder form. A typical SCB grout plant is shown below.
Because the grout must be added in small yet fairly precise ratios, mixing is often done in a mixing box rather than on the ground. Mixing is usually accomplished using an excavator, much the same as for an SB wall. Backfill can also be placed with the excavator.
Properties of Soil Cement Bentonite Backfill
Adding the cement grout to the backfill generally means a higher (worse) permeability than would be obtained with the same material without the cement. This is because the Portland cement interferes with the bentonite and prevents it from achieving its full swelling potential. Typical permeabilities for SCB backfill are in the range of 10-7 cm/sec. Typical unconfined strengths are in the range of 30-150 psi (0.2 to 1 MPa). Unlike CB, SCB permeability remains relatively unchanged over longer time intervals, however, SCB strength does continue to improve over time.
Learn More about Slurry CutOff Walls
- Geo-Solutions has authored and participated in numerous papers on slurry walls. View our library to read and download several slurry cut-off wall technical papers.
- Learn more from case studies on slurry walls in our section on Case Studies.
- Learn more and view pictures of our slurry wall equipment in our section on Equipment.
Slurry Wall Sample Specifications
Read and download Geo-Solutions sample specs for soil bentonite slurry cut-off walls, cement bentonite slurry walls, soil-cement-bentonite slurry walls, composite slurry walls, and bio-polymer slurry groundwater collector trenches.