 |
Geo-Solutions High-capacity Slurry / Grout Pump with Variable Speed Controller. Shown here operating on a site in Niagara Falls, NY, this grout pump placed grout at a rate of 2.5 cy (500 gpm) per minute. It has an n electronic controller that enables it to shift pumping rates continuously over its entire range. |
| Geo-Solutions Slurry Pumps. Geo-Solutions has a large selection of slurry pumps in 4 inch and 6 inch size ranges. These pumps are designed for pumping viscous and abrasive slurries over long distances. It is shown here on a slurry mix pond at a levee repair project in Okeechobee, FL. |
 |
 |
Geo-Solutions Grout Transfer Pump. High pressure self-contained grout pump used for jet grouting and jet mixing of soil columns. It can be used for single phase or dual jet grouting or even triple jet grouting. This pump has the highest performance features of any pump in the world. |
| High Pressure Self-contained Grout Pump used for Jet Grouting and Jet Mixing of Soil Columns. It can be used for single phase or dual jet grouting or even triple jet grouting. This pump has the highest performance features of any pump in the world. It is shown ready to operate on a project in Toronto Canada where the objective is to create a large block of stabilized soil for a tunneling machine to transition into a vertical access shaft. |
 |
 |
Jet Pump Control Panel. The control panel for the jet grout pump features numerous controls to accurately place jet grout or jet mix materials in the ground. Pressure and flow can be adjusted and maintained over a wide range. Maximum pressures are 7,000 psi (500 bars) and maximum flow rates are in the range of 120 gpm (450 l/min). |
As can be seen in this section, the slurry pumps and grout pumping equipment owned by Geo-Solutions is absolutely top of the line in every respect.
